Dingoo A320 not Charging.
Hi all,
Seen a few other threadds about this but nothing that truly solves my problem.
I am using the cable that came with the A320 (and have tried a few others) and have used it in USB and int he mains (using a 3 Pin adapter on the Chinese Socket).
It shows the Battery symbol with no + symbols, just a solid green bar and it will stay like that either for a few seconds or permanently.
Last night I had it on just the USB symbol in the mains for 12 hours and it went from 1 bar to 2 and when I used it it dropped back to 1 bar within 2 minutes.
This leads me to believe it simply is not charging.
As I write this, it is in USB with the solid green battery symbol and 1 bar and assume it will probably do nothing.
Any suggestions?
Thanks
COuld be cable. Try different ones.My original Dingoo USB cable did not work so I tried different ones and found that they worked. Also you can connect DIngoo to USB Wall Mount or USB charge from PC.
If that does not work then I suggest sending it back as you make have an issue with Dingoo.
had the same prob, seems the software believes the battery is fully charged while it is not. I solved it by hooking it up to the pc and leave it there. (did the software disconnect) after 1 day of charging it is full. It doesnt show any signs of charging this way but it did charge.